Dry! The latest plastic packaging testing technology is here!
Dry! The latest plastic packaging testing technology is here!
Detection defect, optimization process, increase productivity, detection everywhere! What are the latest plastic packaging testing techniques? In K2016, the Layer Watcher INTRAVIS, which USES coherent infrared light source, showed its latest development results, Layer Watcher. The system USES coherent infrared light source to measure, and can accurately measure the position and thickness of middle layer. Instead of measuring the thickness at one point, the Layer Watcher provides the entire point network with its extremely high data rate, so that each Layer of the blank can be described in detail. In addition to displaying the current scan results with grayscale images, the Layer Watcher can also provide an optional feature directly to evaluate the quality of the 3d pseudo-color image. Therefore, the Layer Watcher is the ideal device for measuring the barrier Layer - such as the transparent slab and the dark translucent form. The most commonly used inspection system for the PreWatcherIII is PreWatcherIII. INTRAVIS also exhibits the next generation of the system in K2016. The company has upgraded it with a variety of important innovative technologies, including a two-channel delivery system that can deliver billets to a better centrifugal unit. Any excess billet is transported to a special outlet, away from the centrifugal feeder, and into the hopper. The Pre Watcher III is also equipped with new software, such as the new type blank neck support ring. There is no need for additional hardware for this module - images that are read for the cavity number are also used to check the support ring. Defects such as damage, contaminants and scratches can be detected, and these defects can cause problems in the production process. Intra Visualizer: create trend statistics Intra Visualizer is a newly developed software for converting all measurements of INTRAVIS system into a single, easy-to-read graph. In this way, users can easily monitor all the production lines equipped with INTRAVIS system, which can show the results of different time periods, such as several shifts or days, and single data; Changes in the characteristics of various products can be tracked accurately on the screen. Software can run on any standard Internet browser and can be used with touch screens. Intra Visualizer is also able to create trend statistics that help reduce the rate of scrap. The parameters selected by the measurement are analyzed by Intra Visualizer. When a value is permanently deviated from the required standard value, it will also be displayed. The screen displays the expected failure time (ETF) and can be automatically generated via email. This is the time when the product that is estimated by the change trend begins to defect. Users can now intervene in production before they exceed the tolerance limit, thereby preventing waste products and materials, thereby increasing productivity.
